Puzzle #196 - Solved! Lanchester Dauphin

[Otto Puzzell]

Know what it is?

Please, respond below and let us know the make and model designation of the car posted here.

If you haven't registered yet, you need to do so in order to reply with your answer.  You can do so by clicking here.

Also, please be sure to check out our other puzzles, and, please post a puzzle of your own if you'd like - the more, the merrier.

[SeaLion]

It is the british Lanchester Dauphin from 1954. It had a 2.5 litre inline 6 Daimler engine. The body design was done by Hooper.

[Allan L]

There was a Daimler version of it with not only the Daimler corrugated radiator top, but a matching corrugated top to the two lamp surrounds. Lady Docker had one with all that gold-plated.

[Otto Puzzell]

Correct!

The Lanchester brothers built the first truly all-British car in 1895: underpowered, it was rebuilt the next year with a balanced (two cylinders, two counter-rotating cranks, six connecting rods) power unit, air-cooled, and with Frederick Lanchester's famous wick carburetor. One valve per cylinder was both inlet and exhaust, thanks to a concentric "crossover" disc valve.

The experimental cars set the pattern for production vehicles, which began to leave the Lanchester Engine Company's Armourer Mills, Birmingham, factory in 1900: there was no bonnet, the driver sitting well forward behind a hinged leather dashboard, steering with a right-hand tiller. Cantilever springs had the same periodicity as a walking man; final drive was by Lanchester worm; compound epicyclical gearing gave three forward speeds. The first Lanchesters had 4035cc twin-cylinder air- cooled engines and incorporated a disc brake in the transmission; a water-cooled version appeared in 1902, a larger 18 hp model in 1904. Rudyard Kipling was an early owner who reflected his enthusiasm for the car in his short stories. Also in 1904 came the first four-cylinder, the over-square 20 hp of 2471cc.

Though in engineering terms Lanchesters were a long way ahead of their contemporaries they pioneered the rigorous interchangeability of parts their very unorthodoxy created sales resistance. So in 1907 wheel steering became available. A 38 hp six of 3295cc joined the 28 hp: it was to solve problems of six-cylinder vibration that Frederick Lanchester devised his famous crankshaft damper. Youngest brother George Lanchester took over as chief engineer and in 1914 produced a thoroughly conventional long-bonneted "Sporting Forty" 5560cc sv six, with half-elliptic front springs: a similar chassis was used on the 6178cc ohv Forty of 1919.

Though it was so different from the pre-war Lanchesters, the new Forty was a worthy rival for the Rolls-Royce 40/50 hp; it was joined in 1924 by an ohc 2982cc 21 hp six. A 4440cc straight-eight was launched at the 1928 Southport Rally, again with ohc: it proved to be the last "real" Lanchester, for in 1931 the company was acquired by Daimler, and Lanchesters became merely re-radiatored Daimlers.

The 1932 "Ten" was still in production in the late 1940s, updated with independent front suspension;1952 saw a "14", whose chassis was used on the six-cylinder Daimler-engined, Hooper-bodied Dauphin;1956 saw the short-lived Sprite 1.6-litre with Hobbs automatic transmission.

http://www.vea.qc.ca

[grobmotorix]

A better photo: