Solved by DeAutogids & Co. - A Big Puzzle.

Started by Allemano, February 02, 2011, 10:59:50 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DeAutogids

Quote from: Carnut on February 08, 2011, 07:42:09 AM
Quote from: DeAutogids on February 08, 2011, 06:51:35 AM
The bodywork is called Panoramica.

No - the Panoramica was a slightly earlier model without windows in the lower part of the rear.
The puzzle picture is the Superpanoramica!
Indeed.
But I think we can agree then that the solution should not be:
#19 Carozzeria Barbi Fiat 682 "Super-Panoramico" (Carnut)
but
#19 Carozzeria Barbi "Super-Panoramico" Fiat 682 (Carnut) or Fiat 682 with Carozzeria Barbi "Super-Panoramico" bodywork

Carnut

Interests in life:  Cars, cars, cars - oh and ..er..cars

Allemano


Carnut

Interests in life:  Cars, cars, cars - oh and ..er..cars

woodinsight

Congratulations on your 5000th post Carnut

Carnut

Quote from: woodinsight on February 11, 2011, 11:31:40 AM
Congratulations on your 5000th post Carnut

Crikey, I never noticed!
Thanks woodinsight.
It worries me when I see the number of days, hours and minutes I've been on the site.
I wonder if that feature can be switched off!
Interests in life:  Cars, cars, cars - oh and ..er..cars


Carnut

Interests in life:  Cars, cars, cars - oh and ..er..cars


Oguerrerob

12. Melrose M880 Pusher 8x8 built by CF&I Engineering from Denver Colorado 1970with a dozer blade

Allemano

Quote from: Oguerrerob on February 12, 2011, 06:33:04 AM
12. Melrose M880 Pusher 8x8 built by CF&I Engineering from Denver Colorado 1970with a dozer blade
I guess you're right. :)
Will check it at home later!

DeAutogids

Quote from: Allemano on February 12, 2011, 06:53:50 AM
Quote from: Oguerrerob on February 12, 2011, 06:33:04 AM
12. Melrose M880 Pusher 8x8 built by CF&I Engineering from Denver Colorado 1970with a dozer blade
I guess you're right. :)
Will check it at home later!
How did it check out?

DeAutogids

Quote from: Carnut on February 06, 2011, 02:54:29 PM
#6 is the Viberti-bodied Fast AT1007 bus, designed by Ricciotti Tonon, who also designed the classic Turin Double Decker bus.

Still haven't found #19 yet though...
Could it be a Viberti half-deck body on an Alfa-Romeo chassis?
Interestingly, my source tells this bus had a GM motor and was supposedly sold in Canada?

Wendax

#88
Hello Pros,
may I join in?

#1: Kress CH-300 Bottom Dump Coal Hauler
#4: Orion WH 159 from 1955, Germany
#17: Kato NK-160X1 ?

Carnut

Quote from: DeAutogids on February 24, 2011, 11:14:31 AM
Quote from: Allemano on February 12, 2011, 06:53:50 AM
Quote from: Oguerrerob on February 12, 2011, 06:33:04 AM
12. Melrose M880 Pusher 8x8 built by CF&I Engineering from Denver Colorado 1970with a dozer blade
I guess you're right. :)
Will check it at home later!
How did it check out?

Allemano seems to have forgotten about this puzzle...!
Interests in life:  Cars, cars, cars - oh and ..er..cars

Allemano

I'm sorry, I forgot about this one.

Hope I'll get it done later in the evening...

Allemano

#91
Quote from: Oguerrerob on February 12, 2011, 06:33:04 AM
12. Melrose M880 Pusher 8x8 built by CF&I Engineering from Denver Colorado 1970with a dozer blade
:thumbsup: and sorry again, for the delay.

Allemano

Quote from: Wendax on March 05, 2011, 04:12:30 PM
Hello Pros,
may I join in?

#1: Kress CH-300 Bottom Dump Coal Hauler
#4: Orion WH 159 from 1955, Germany
#17: Kato NK-160X1 ?

#1: Kress CH-300 Bottom Dump Coal Hauler  - right make, wrong model
#4: Orion WH 159 from 1955, Germany - correct!
#17: Kato NK-160X1 ? - No

Wendax

Quote from: Allemano on March 06, 2011, 10:44:48 AM

#1: Kress CH-300 Bottom Dump Coal Hauler  - right make, wrong model


Kress 200C II Coal Hauler

Allemano

Quote from: Wendax on March 06, 2011, 10:56:40 AM
Quote from: Allemano on March 06, 2011, 10:44:48 AM

#1: Kress CH-300 Bottom Dump Coal Hauler  - right make, wrong model


Kress 200C II Coal Hauler
:shakehead:

Wendax


Allemano


Wendax

#17: Kato NK-160 E-V ?

Allemano


Wendax