Solved: 727 № 309 - Altailesmash ТSBU-200M 🇷🇺

727 · May 12, 2021, 04:11:26 PM

Please name the vehicle for 1 point.

727 · May 21, 2021, 07:04:23 PM

Experts.

kitaharo · May 24, 2021, 04:20:22 AM

flower road wheels , looks like based on PT-76
but only 1 support rollers?!
PT-76 doesn't have support rollers...

727 · May 24, 2021, 10:49:47 AM

You are on the right track regarding the country of origin.

kitaharo · May 24, 2021, 11:05:31 PM

chassis is based on GAZ GT-T , that's all l can know...

727 · May 25, 2021, 07:37:26 AM

I can tell you it's commercially sold, it has its special purpose, and it's not armored or for military use or for Mad Max movies despite its appearance.

kitaharo · May 26, 2021, 10:13:06 PM

not for military use?

hmm...it's for polar adventure ? fire watch? could be millions of way to use this big monster

727 · May 27, 2021, 08:34:50 AM

Quote from: kitaharo on May 26, 2021, 10:13:06 PMhmm...it's for polar adventure ?

It is.

727 · May 28, 2021, 05:41:43 PM

Pros.

727 · June 03, 2021, 11:14:15 AM

Masters.

Oguerrerob · June 03, 2021, 12:19:44 PM

Russian?

727 · June 03, 2021, 01:02:26 PM

Yes.

Oguerrerob · June 03, 2021, 03:03:40 PM

Girtek?

727 · June 03, 2021, 03:08:48 PM

No.

Oguerrerob · June 03, 2021, 04:34:17 PM

Altai?

727 · June 03, 2021, 04:35:27 PM

Yes. But look for a longer name. I'll lock it for you, you're too close!

Oguerrerob · June 04, 2021, 01:29:46 AM

Company name: Altailesmash («АЛТАЙЛЕСМАШ»).

Oguerrerob · June 04, 2021, 03:01:22 AM

TSBU-200M is used for exploratory rotational drilling of vertical and sloping wells in hard-to-reach mountain-taiga areas at any time of the year at a temperature of 40 degrees C - 40 degrees C.

The installation is mounted on a special frame-base, fortified on the basis of the MCH-4 skiding machine or a tractor of forestry TL-5ALM/TL-5ALM-01.

All equipment is located in the drilling salon, taking into account safety rules in the conduct of exploration. When transporting the mast is located along the longitudinal axis of the installation. Lifting the mast from the transport position and back is made by hydraulics in two stages. Hydrodomcrats raise the middle part of the mast and fasten it to the base. Then lift the top until the snaps are fixed with the middle part. Installation of the mast for sloping drilling is done by hand, and from the sloped position to the vertical - hydro-double. The hydraulic control is located on the base of the mast in the cabin. The pipe is attached to a special frame that ensures that it is installed at the necessary angle of inclination. To remove the load from the chassis of the tractor during drilling, three screw jacks are provided.

727 · June 04, 2021, 08:51:45 AM

That's the one! Here's your point.

Oguerrerob · June 04, 2021, 08:53:05 AM

Thank you!

News:

Solved: 727 № 309 - Altailesmash ТSBU-200M 🇷🇺